Winchester 10 SEER Air Conditioning Systems

CONDENSERS	WLE - 10 SEER Air Conditioning Condensers

SUBJECT TO AVAILABILITY

New government regulations have all but depleted availability of 10 SEER air conditioning systems. However, Hamilton still has these units available while our supplies last.

10 SEER condensers cost up to 40% less to purchase than 13 SEER systems, which have been mandated as the "NEW MINIMUM EFFICIENCY" by the U.S. government!

WLE 10 SEER Air Conditioining Condensers

The WLE series condensers effectively lower humidity levels while maintaining the desired room temperature. These units are pre-charged at the factory and are equipped with quick connect fittings. Hamilton single phase split systems work with all air conditioning ready furnaces and air handlers.

When matched with one of our quick connect indoor coils and line sets, the entire hermetically sealed system reduces installation time and expense since there is no brazing or charging on most typical installations.

Also See: Cooling Basics

1 Year Limited Parts Warranty 5 Year Limited Compressor Warranty

Basic Condenser Layout

FEATURES
Condensers are pre-charged with R-22 refrigerant and have quick connect fittings to reduce installation time. Internally protected compressor guards against high pressure and temperature. Factory installed liquid line filter drier. Low sound level during unit operation. Weatherized pre-painted steel casing to resist corrosion & rust. • Color coded wiring makes unit easy to service. Top warm air discharge keeps air away from structure and landscaping. Long-life, permanently lubricated motor bearings need no annual servicing. Match the condenser with the proper coil and line set for a complete system. Approved for Mobile Home Use

HOW TO SELECT A 10 SEER AIR CONDITIONING SYSTEM

Estimating the A/C System Size

You can refer to an estimate or proposal from a local contractor, refer to the size of your existing system that you may want replaced, or use the sizing estimation chart provided on this page.

Use the map to determine your Region based on the location of your home. Using the equipment charts, find your Region and go down the column to locate the range that covers the Square Footage of your home. Follow the row to the right to determine the recommended System Size for your Air Handler.

Estimate the Heating and Cooling Size for your home.

NOTE: These tables and charts are intended to be used as a guideline only. The information is based on conventional window space (<15%), insulation and building construction. Only use these tables as a reference. When including a finished basement, use 1/2 of the finished basement square footage with the rest of the area being calculated.

10 SEER AIR CONDITIONING CONDENSER SELECTION

SQUARE FOOTAGE OF YOUR HOME						SYSTEM SIZE
	REGION 1	REGION 2	REGION 3	REGION 4	REGION 5	SYSTEM SIZE
	1125-1500	1060-1410	1000-1335	800-1090	820-1090	2 TON
	1500-1875	1410-1765	1335-1665	1090-1365	1090-1365	2.5 TON
	1875-2250	1765-2120	1665-2000	1365-1635	1365-1635	3 TON
	2250-2625	2120-2470	2000-2335	1635-1910	1635-1910	3.5 TON
	2625-3000	2470-2825	2335-2665	1910-2180	1910-2180	4 TON
	3000-3440	2825-3235	2665 -3055	22180-2500	2180-2500	4.5 TON

Complete Split System Breakdown

OUT OF STOCK

Item #

Dimensions (Inches)

(h x w x d)

Cooling Tons

Wt. (lbs.)

WLE 24C

22 x 21.75 x 21.75

2.0

140

Item #

Dimensions (Inches)

(h x w x d)

Cooling Tons

Wt. (lbs.)

WMQ 24-14C

20 x 14.5 x 22

Fits furnaces with 14.5" unit width.

1.5-2.0

WMQ 24-17C

20 x 17.5 x 22

Fits furnaces with 17.5" unit width.

1.5-2.0

Item #

Description

For use with

Wt. (lbs.)

WLS-20C

20' - 3/4" dia. Refrigerant Line Set

2.0-3.5 Ton Systems

WLS-30C

30' - 3/4" dia. Refrigerant Line Set

4.0-5.0 Ton Systems

WLS-40C

40' - 3/4" dia. Refrigerant Line Set

4.0-5.0 Ton Systems

Item #

Description

Wt. (lbs.)

1F78-151

5 Day / 2 Day Digital Programmable "Heat & Cool" Thermostat For Single Stage heating and cooling applications.

ACPD 2424

"Easy-To Install" Condenser Pad (24" X 24")

Reduces condenser noise and vibration.

WKDP-14

Custom Supply Air Plenum

Plenum kit to fit 14.5" coil case width.

WKDP-17

Custom Supply Air Plenum

Plenum kit to fit 17.5" coil case width.


Complete Split System Breakdown
*OUT OF STOCK*

Item #	Dimensions (Inches) (h x w x d)	Cooling Tons	Wt. (lbs.)
WLE 30C	22 x 21.75 x 21.75	2.5	148

Item #	Dimensions (Inches) (h x w x d)	Cooling Tons	Wt. (lbs.)
WMQ 36-14C	20 x 14.5 x 22 Fits furnaces with 14.5" unit width.	2.5-3.0	57
WMQ 36-17C	20 x 17.5 x 22 Fits furnaces with 17.5" unit width.	2.5-3.0	58
WMQ 36-21C	20 x 21 x 22 Fits furnaces with 17.5" unit width.	2.5-3.0	62

Item #	Description	For use with	Wt. (lbs.)
WLS-20C	20' - 3/4" dia. Refrigerant Line Set	2.0-3.5 Ton Systems	20
WLS-30C	30' - 3/4" dia. Refrigerant Line Set	4.0-5.0 Ton Systems	25
WLS-40C	40' - 3/4" dia. Refrigerant Line Set	4.0-5.0 Ton Systems	40

Item #	Description		Wt. (lbs.)
1F78-151	5 Day / 2 Day Digital Programmable "Heat & Cool" Thermostat For Single Stage heating and cooling applications.		1
ACPD 2424	"Easy-To Install" Condenser Pad (24" X 24") Reduces condenser noise and vibration.		14
WKDP-14	Custom Supply Air Plenum kit to fit 14.5" coil case width.		24
WKDP-17	Custom Supply Air Plenum to fit 17.5" coil case width.		26
WKDP-21	Custom Supply Air Plenum kit to fit 21" coil case width.		28


Complete Split System Breakdown


Item #	Dimensions (Inches) (h x w x d)	Cooling Tons	Wt. (lbs.)
WLE 36C	19 x 35 x 23	3.0	164

Item #	Dimensions (Inches) (h x w x d)	Cooling Tons	Wt. (lbs.)
WMQ 36-14C	20 x 14.5 x 22 Fits furnaces with 14.5" unit width.	2.5-3.0	57
WMQ 36-17C	20 x 17.5 x 22 Fits furnaces with 17.5" unit width.	2.5-3.0	58
WMQ 36-21C	20 x 21 x 22 Fits furnaces with 17.5" unit width.	2.5-3.0	62

Item #	Description	For use with	Wt. (lbs.)
WLS-20C	20' - 3/4" dia. Refrigerant Line Set	2.0-3.5 Ton Systems	20
WLS-30C	30' - 3/4" dia. Refrigerant Line Set	4.0-5.0 Ton Systems	25
WLS-40C	40' - 3/4" dia. Refrigerant Line Set	4.0-5.0 Ton Systems	40

Item #	Description		Wt. (lbs.)
1F78-151	5 Day / 2 Day Digital Programmable "Heat & Cool" Thermostat For Single Stage heating and cooling applications.		1
ACPD 2436	"Easy-To Install" Condenser Pad (24" X 36") Reduces condenser noise and vibration.		16
WKDP-14	Custom Supply Air Plenum kit to fit 14.5" coil case width.		24
WKDP-17	Custom Supply Air Plenum to fit 17.5" coil case width.		26
WKDP-21	Custom Supply Air Plenum kit to fit 21" coil case width.		28


Complete Split System Breakdown
*OUT OF STOCK*

Item #	Dimensions (Inches) (h x w x d)	Cooling Tons	Wt. (lbs.)
WLE 42C	25 x 35 x 23	3.5	175

Item #	Dimensions (Inches) (h x w x d)	Cooling Tons	Wt. (lbs.)
WMQ 48-21C	24 x 21 x 22 Fits furnaces with 21" unit width.	3.5-4.0	65
WMQ 48-24C*	24 x 24.5 x 22 Fits furnaces with 24.5" unit width.	3.5-4.0	74

Item #	Description	For use with	Wt. (lbs.)
WLS-20C	20' - 3/4" dia. Refrigerant Line Set	2.0-3.5 Ton Systems	20
WLS-30C	30' - 3/4" dia. Refrigerant Line Set	4.0-5.0 Ton Systems	25
WLS-40C	40' - 3/4" dia. Refrigerant Line Set	4.0-5.0 Ton Systems	40

Item #	Description		Wt. (lbs.)
1F78-151	5 Day / 2 Day Digital Programmable "Heat & Cool" Thermostat For Single Stage heating and cooling applications.		1
ACPD 2436	"Easy-To Install" Condenser Pad (24" X 36") Reduces condenser noise and vibration.		16
WKDP-21	Custom Supply Air Plenum to fit 21" coil case width.		28
* THERE ARE CURRENTLY NO CUSTOM PLENUMS AVAILABLE FOR 24.5" COIL WIDTH


Complete Split System Breakdown
OUT OF STOCK

Item #	Dimensions (Inches) (h x w x d)	Cooling Tons	Wt. (lbs.)
WLE 48C	27 x 37 x 27	4.0	197

Item #	Dimensions (Inches) (h x w x d)	Cooling Tons	Wt. (lbs.)
WMQ 48-21C	24 x 21 x 22 Fits furnaces with 21" unit width.	3.5-4.0	65
WMQ 48-24C*	24 x 24.5 x 22 Fits furnaces with 24.5" unit width.	3.5-4.0	74

Item #	Description	For use with	Wt. (lbs.)
WLS-30/1A	30' - 7/8" dia. Refrigerant Line Set	3.5-5 Ton Systems	31

Item #	Description		Wt. (lbs.)
1F78-151	5 Day / 2 Day Digital Programmable "Heat & Cool" Thermostat For Single Stage heating and cooling applications.		1
ACPD 3040	"Easy-To Install" Condenser Pad (28" x 38") Reduces condenser noise and vibration.		26
WKDP-21	Custom Supply Air Plenum to fit 21" coil case width.		28
* THERE ARE CURRENTLY NO CUSTOM PLENUMS AVAILABLE FOR 24.5" COIL WIDTH


Complete Split System Breakdown

Item #	Dimensions (Inches) (h x w x d)	Cooling Tons	Wt. (lbs.)
WLE 55C	29 x 37 x 27	4.5	230

Item #	Dimensions (Inches) (h x w x d)	Cooling Tons	Wt. (lbs.)
WMQ 60-24C*	24 x 24.5 x 22 Fits furnaces with 24.5" unit width.	4.5-5	82

Item #	Description	For use with	Wt. (lbs.)
WLS-30/1A	30' - 7/8" dia. Refrigerant Line Set	3.5-5 Ton Systems	31

Item #	Description		Wt. (lbs.)
1F78-151	5 Day / 2 Day Digital Programmable "Heat & Cool" Thermostat For Single Stage heating and cooling applications.		1
ACPD 3040	"Easy-To Install" Condenser Pad (28" x 38") Reduces condenser noise and vibration.		26
* THERE ARE CURRENTLY NO CUSTOM PLENUMS AVAILABLE FOR 24.5" COIL WIDTH

Available PDF downloads for:

WLE - 10 SEER Air Conditioning Condensers

WLE Condenser Installation Manual	(396 KB)
WLE Specifications Sheet	(85 KB)
WLE 24C & 30C, Replacement Parts List	(212 KB)
WLE 36C, 42C, 48C, & 55C Replacement Parts List	(256 KB)

Copyright in all of the material on the Hamilton Home Products, Inc. and associated websites, including but not limited to information, text, artwork, images, and pictures (herein referred to as "CONTENT"), is either owned by or administered by Hamilton Home Products, Inc. (for the purpose of this notice Hamilton Home Products shall include Hamilton, its employees, servants and agents) for and on behalf of Hamilton Home Products, Inc. P.O. Box 185, Canal Winchester, Ohio 43110