The 2-stage WUT gas furnaces are available for upflow only applications and operate at a lower firing rate (saving money) during mild winter days, and at full capacity during colder days to conserve the most fuel. These units offer increased comfort and quiet operation and are designed for residential and commercial installations in a basement, closet, alcove, recreation room or garage where the ambient temperature is above 32°F. They may be either side wall or vertically vented using schedule 40 PVC or ABS pipe type combustion air and vent piping. All units are factory assembled, wired and tested to assure dependable and economical installation and operation. Also See: Heating Basics

FEATURES

• Two Stage - Natural Gas Ready and can be converted to LP Gas (Propane) with optional conversion kit.

• Two stage inducer operation and 100% shut off main gas valve for extra safety.

• Adjustable delay timer allows two stage operation with single stage thermostat.

• Compact, easy to install, 40" cabinet.

• Electronic Hot Surface Ignition saves fuel cost with increased dependability and reliability.

• Induced combustion system with in-shot main burners for quiet, efficient operation.

• Timed on, adjustable off blower capability with blower-off delay for maximum comfort.

• Integrated control module with high level self diagnostics and fault code display for reliable, economical operation.

• Top air intake & vent connections allow installation in narrow locations as either two-pipe or single pipe vent.

• PSC four speed, direct blower motor with and insulated blower compartment for quiet operation.

• Tubular aluminized steel primary heat exchanger with stainless steel secondary heat exchanger.

  Approved for use in California

  Not Certified for Mobile Home use

HOW TO SELECT A 92%+ EFFICIENT GAS FURNACE

Estimating the Furnace Size

You can refer to an estimate or proposal from a local contractor, refer to the size of your existing system that you may want replaced, or use the sizing estimation chart provided on this page.

Use the map to determine your Region based on the location of your home. Using the equipment charts, find your Region and go down the column to locate the range that covers the Square Footage of your home. Follow the row to the right to determine the recommended Furnace for your application.

NOTE: These tables and charts are intended to be used as a guideline only. The information is based on conventional window space (<15%), insulation and building construction. Only use these tables as a reference. When including a finished basement, use 1/2 of the finished basement square footage with the rest of the area being calculated.

SQUARE FOOTAGE OF YOUR HOME

FURNACE SIZE

REGION 1

REGION 2

REGION 3

REGION 4

REGION 5

60,000 BTU

80,000 BTU

100,000 BTU

92%+ AFUE 2-STAGE GAS FURNACE MODELS - Upflow Only

Hamilton

Model Number

Dimensions

h x w x d (in.)

Available

Tons

Outlet Opening

w x d (in.)

Wt.

(lbs.)

WUT 060-3C

40 x 17.5 x 30.12

1.5-3.0

16.25 x 20

150

WUT 080-3C

40 x 17.5 x 30.12

1.5-3.0

16.25 x 20

158

WUT 100-4C

40 x 21 x 30.12

2.5-4.0

19.75 x 20

178

Optional Accessories

Item #

Description

Wt. (lbs.)

1F81-261

1

LP 580

LP (Propane) Conversion Kit

1

RA 16

50

Additional Heating and Cooling Accessories

Available PDF downloads for:

WUT - 92%+ High Efficiency Furnaces

© Copyright 2010 Hamilton Home Products, Inc.

Copyright in all of the material on the Hamilton Home Products, Inc. and associated websites, including but not limited to information, text, artwork, images, and pictures (herein referred to as "CONTENT"), is either owned by or administered by Hamilton Home Products, Inc. (for the purpose of this notice Hamilton Home Products shall include Hamilton, its employees, servants and agents) for and on behalf of Hamilton Home Products, Inc. P.O. Box 185, Canal Winchester, Ohio 43110