|
| |
|
95.5%
EFFICIENT
MULTI-POSITIONAL
Residential GAS FURNACES
|
|
The W9M Series
furnace can be installed in upflow or horizontal applications and can be
easily converted for downflow applications. The compact cabinet height
of only 33" makes the unit perfect for basements, closets, attics,
garages and commercial applications. the furnace is air conditioning
ready with an adjustable speed blower motor for maximum comfort.
All units are factory assembled, wired and tested to assure safe,
dependable and economical operation. These furnaces are designed for
both residential and commercial installations and make a great choice
when replacing a furnace in a residence, apartment, or rental property.
The condensing gas furnace may be installed as a single pipe system,
using indoor air for combustion, or as a 2-pipe sealed combustion
system, bringing in fresh outdoor air for combustion. Since the
flue gases are at a much lower temperature, the furnace may be vented
vertically or horizontally with schedule 40 PVC or ABS pipe. Plus, the
unit is Air Conditioning ready with an adjustable speed blower motor for
maximum comfort.
      |
|
For a List of Frequently Asked Questions about the Federal Tax
Credit,
Click Here. |
|
To Print your Tax Credit Certificate for Qualifying Gas Furnace
Models,
Click Here. |
|
(Please Note: Qualifying WINCHESTER
gas furnace models can be found on Page 36 of the document.
Refer to the manufacturer's model number on your equipment.) |
FEATURES
-
Natural gas ready, may be field
converted to LP Gas (Propane) with optional conversion kit (LP 347)
-
Multi-positional design with compact cabinet height of 33 inches
-
Minimal
conversion for downflow application (additional clearance needed for
venting)
-
Control board with high level self-diagnostics
and fault code displays to save
time on servicing and troubleshooting
-
Electronic hot surface ignition
increases safety and efficiency
-
Direct Drive, Permanently Lubricated
Blower Motor has adjustable speed to maximize comfort level
-
Induced combustion system with
in-shot main burners for quiet, efficient operation
-
Horizontal and vertical venting
w/PVC pipe
-
High tech tubular aluminized steel primary
heat exchanger, with stainless steel secondary heat exchanger
-
Energy Star®
Compliant
Approved for use in California
Not Certified for Mobile
Home use
|
|
HOW TO
SELECT A 95.5% EFFICIENT GAS FURNACE |
|
Estimating the Furnace Size |
 |
|
You can refer to an estimate or
proposal from a local contractor, refer to the size of your existing
system that you may want replaced, or use the sizing estimation
chart provided on this page.
Use the map to determine your
Region based on the location of your home. Using the equipment
charts, find your Region and go down the column to locate the
range that covers the Square Footage of your home. Follow the
row to the right to determine the recommended Furnace for your
application. |
|
NOTE: These tables and charts are
intended to be used as a guideline only. The information is based on
conventional window space (<15%), insulation and building
construction. Only use these tables as a reference. When including a
finished basement, use 1/2 of the finished basement square footage
with the rest of the area being calculated. |
95.5%
AFUE MULTI-POSITIONAL GAS FURNACES SELECTION
|
SQUARE FOOTAGE OF YOUR HOME |
FURNACE SIZE |
|
REGION
1 |
REGION 2 |
REGION 3 |
REGION 4 |
REGION
5 |
|
740-925 |
800-1000 |
895-1110 |
1085-1350 |
1215-1520 |
40,000
BTU |
|
925-1390 |
1000-1500 |
1110-1675 |
1350-2035 |
1520-2280 |
60,000
BTU |
|
1390-1850 |
1500-2000 |
1675-2235 |
2035-2700 |
2280-3040 |
80,000 BTU |
|
1850-2310 |
2000-2500 |
2235-2790 |
2700-3390 |
3040-3800 |
100,000 BTU |
|
2310-2775 |
2500-3000 |
2790-3350 |
3390-4070 |
3800-4560 |
120,000 BTU |
|
|
95.5% AFUE MULTI-POSITIONAL
GAS FURNACE MODELS |
|
Hamilton |
BTU |
Dimensions |
Available |
Outlet |
Wt. |
|
Model Number |
Input/Output |
H x W x D (in.) |
Tons |
Opening |
lbs. |
|
W9M040-214 |
40,000 / 38,000 |
33 x 14.5 x 29.5 |
1.5-2.0 |
13.375 x 20 |
113 |
|
W9M060-317 |
60,000 / 57,000 |
33 x 17.5 x 29.5 |
2.0-3.0 |
16.375 x 20 |
122 |
|
W9M080-317 |
80,000 / 76,000 |
33 x 17.5 x 29.5 |
2.0-3.0 |
16.375 x 20 |
126 |
|
W9M100-421 |
100,000 / 95,000 |
33 x 21 x 29.5 |
2.5-4.0 |
19.875 x 20 |
142 |
|
W9M120-524 |
120,000 / 114,000 |
33 x 24.5 x 29.5 |
3.5-5.0 |
23.375 x 20 |
156 |
|
Optional Accessories |
|
Item # |
Description |
Wt. (lbs.) |
|
LP 347 |
LP (Propane) Conversion Kit |
1 |
|
RA 16 |
Return Air Drop - For Upflow
Applications Only |
50 |
|
WKDP 20 |
20"w x 20"d x 47'h Universal Trim to Fit Plenum
|
28 |
|
CB 414/514 |
Combustible Base for 14.5"
Downflow Applications - Heat Only* |
8 |
|
CB 417/517 |
Combustible Base for 17.5"
Downflow Applications - Heat Only* |
9 |
|
CB 421/521 |
Combustible Base for 21" Downflow
Applications - Heat Only* |
10 |
|
*PLEASE NOTE:
Combustible Base is only required for downflow, heat ONLY
applications where the surface is combustible such as a wood
sub-floor. |
|
|
|
Additional
Heating and Cooling Accessories |
|
|
