Sale

Hamilton 12HF Whole House Water Saver Flow-Through Humidifier with Evaporator Pad

$160.00

Availability: In Stock

[tabby title=”Description”]
Create a healthier environment and increase the comfort of your entire home by installing the Hamilton 12HF whole house furnace-mounted flow through humidifier. Having the proper amount of humidity in your home can help reduce respiratory infections, control static electricity, prevent house plants from wilting, and stop wood from drying out and cracking. You may also save money on your utility bill, as you can lower your thermostat and feel just as comfortable since humidified air feels warmer. Whether you are replacing an older humidifier, or adding one to your forced air heating system, the 12HF humidifier and its DIY-friendly design can be installed in just a couple of hours.

How Does it Work? When the humidity level drops below the set point of the humidistat and the forced air furnace is running, the patented electronic controller activates the humidifier. Small amounts of fresh water are then added intermittently, flowing through the media pad and the warm air produced by the furnace circulates the humidified air throughout the entire home.

The kit contains everything needed for most installation applications, and requires common hand tools to install in just a couple of hours.

The humidifier is intended for use on forced warm air circulation furnaces, as well as multi-fuel furnaces where temperature does not exceed 180°F (82ºC)

This unit can replace previous Hamilton models, 8FT and 10HF; some modifications are required in the field to accommodate the new housing.

1-Year limited parts warranty
Lifetime limited warranty on frame and cover

Installation Manual

Optional Wiring Instructions

[tabby title=”Features”]
Use 80% less water than other brands of flow-through humidifiers

Designed for homes up to 3,000 sq. ft (well insulated applications) with forced air heating systems; approx. 2,000 sq. ft. for average insulation

Patented electronic controller and plug-in transformer simplify installation; optional wiring diagram available for customer wanting to control via the furnace control board and for heat pump/electric furnace applications

Everything included for most typical installation applications

Plastic body construction is durable, light weight, and easy to handle during installation

Very low maintenance required; replace evaporator pad (EP-037) at least once per season based on the hardness of the water supply

Evaporator pad is framed to keep water channeled and in the path of the air stream

Floor drain is required

[tabby title=”Sizing Guide”]
Designed for average to well insulated homes up to 3,000 sq. ft. with forced air heating systems

[tabby title=”Models & Specs”]
12.5″ h x 14.75″ w x 8.5″ d
Plenum Opening: 8.25″h x 9.125″ w
By-Pass Dimension: 6″ Diameter

Output:
13 gal/day at 120°F Plenum Temperature

Replacement OEM Evaporator Pad for 12HF Humidifier

Item No. Description Weight (lbs.)
EP-037 OEM Framed Evaporator Pad for Model 12HF Humidifier 1

[tabbyending]