10-Year Limited Parts Warranty*
Limited Lifetime Heat Exchanger Warranty
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
*Please Note: To qualify for the extended 10-Year Limited Parts Warranty, the unit must be registered online at www.upgproductregistration.com within 90 days of purchase for replacement or closing for new home construction. Otherwise, the standard 5-Year Limited Parts Warranty is in effect.
Multi-positional compact cabinet height of 33 inches
Minimal conversion for downflow application (additional clearance needed for venting)
Control board with high level self-diagnostics and fault code displays to save time on servicing and troubleshooting
Electronic hot surface ignition increases safety and efficiency
Direct Drive, permanently lubricated blower motor has adjustable speed to maximize comfort level
In-shot burners and sealed combustion for safe, quiet, and efficient operation
Vents horizontally or vertically as either single to two pipe application with schedule 40 PVC/ABS pipe
High tech tubular aluminized steel primary and stainless steel secondary heat exchangers
Not Certified for Mobile Home use
Certified for use in California
HOW TO SELECT A 95.5% EFFICIENT GAS FURNACE
You can refer to an estimate or proposal from a local contractor, refer to the size of your existing system that you may want replaced, or use the sizing estimation chart provided on this page. Use the map to determine your Region based on the location of your home. Using the equipment charts, find your Region and go down the column to locate the range that covers the Square Footage of your home. Follow the row to the right to determine the recommended Furnace for your application.
|Square Footage of Your Home||Furnace Model|
NOTE: These tables an charts are intended to be used as a guideline only. The information is based on conventional window space (<15%), insulation and building construction. Only use these tables as a reference. When including a finished basement, use 1/2 of the finished basement square footage with the rest of the area being calculated.
|Hamilton Model Number||BTU Input/Output||Dimensions H x W x D (in.)||Available Tons||Supply Outlet W x D (in.)||Ship Wt (lbs.)||Energy Guide|
|W9M040-214||40,000 / 38,000||33 x 14.5 x 29.5||1.5 – 2.0||13.375 x 20||113|
|W9M060-317||60,000 / 57,000||33 x 17.5 x 29.5||2.0 – 3.0||16.375 x 20||122|
|W9M080-317||80,000 / 76,000||33 x 17.5 x 29.5||2.0 – 3.0||16.375 x 20||126|
|W9M100-421||100,000 / 95,000||33 x 21 x 29.5||2.5 – 4.0||19.875 x 20||142|
|W9M120-524||120,000 / 114,000||33 x 24.5 x 29.5||3.5 – 5.0*||23.375 x 20||156|
*Please Note: 5 Ton/2000 CFM applications require two (2) side air returns.
Optional Furnace Accessories
|Item No.||Description||Weight (lbs.)|
|LP 347||LP (Propane) Conversion Kit for all Gas Furnaces||1|
|RA 16||Return Air Drop Assembly (Upflow Applications Only)||50|
|WKDP 20||Universal Trim to Fit Plenum – 20″ x 20″ x 47″ (for Heat Only Applications)||28|
|CB 414/514||Combustible Base for 14.5″ Downflow Applications – Heat Only*||8|
|CB 417/517||Combustible Base for 17.5″ Downflow Applications – Heat Only*||9|
|CB 421/521||Combustible Base for 21″ Downflow Applications – Heat Only*||10|
|CB 524||Combustible Base for 24.5″ Downflow Applications – Heat Only*||11|
*Please Note: Combustible Base is only required for downflow, heat only applications where the surface is combustible (ex. wood sub-floor).