Amana® 26″ Mini PTAC TTW (Thru-the-wall) Heating & Cooling Units

The Amana® brand 26″ Mini PTACs are designed for hotel/motel applications and can be used for apartments, room additions, sunrooms, and small living spaces. The PBC Series are perfect for cooling only applications and are available in 115V and 230V models. The 230V PBE Series offers Cooling with Electric Heat, and the PBH Series heat pump with electric heat models offer the most economical year round operation and are available in 115V and 230V models. The 115 models come from the factory with an 8 ft. power cord, while the 230V models have a 6 ft. power cord.  All units feature an electronic touch pad and remote control. The top pull-out polypropylene permanent filter makes it easy to maintain the unit for efficeint operation.

PLEASE NOTE: All new installations require the PBWS01A wall sleeve with exterior grille, and the optional DK900D drain kit is available for internal drain applications. (Shown in product images and must be purchased separately.)

1-Year entire unit limited warranty
5-Year sealed system limited warranty

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Tech Guide

Owners Manual

Drain Kit Install Manual

Wall Sleeve with Grille Install Manual

Electronic touch pad with remote control

High energy efficiency with models up to 10.4 EER saving you money compared to lower EER models

Easily removable condenser top that allows for quick and complete cleaning of outdoor coils. This access for cleaning the outdoor coils enables easy removal of dirt and debris to help lengthen the life of the compressor an other system sealed components.

Easy access slide out filter has a permanent polypropylene filter mesh that is easy to remove and clean

Easy to set switches to configure check filter light, temperature limiting capability, and fan auto cycle for heating and cooling

Accessory wall sleeve: PBWS01A is a solid-sided, insulated metal sleeve. It includes a stamped aluminum exterior grille with a weather-seal rear enclosure for installation without the chassis. The sleeve has a solid bottom for complete weather-tight installation.

100% full factory run test on all units for high reliability and dependability

Designed with comfort in mind – providing reliable, quiet operation for years to come

QUICK SELECT PTAC SIZING AND REFERENCE GUIDE
You can refer to an estimate or proposal from a local contractor, refer to the size of your existing PTAC that you may want replaced, or use the sizing estimation chart provided on this page.

Square Footage of Your Area	PTAC BTU Size	FACTORS THAT AFFECT HEATING AND COOLING
100-150	5000
150-250	6000	Room Size: Sq.Ft. x 30 = Rough Estimate of BTU Output Needed
250-300	7000	Usage: Number of People to Typically Occupy the Space
300-350	8000	Room Design: Ceiling Height and Insulation Factors
350-400	9000	Room Location: Direction the Room Faces; Amount of Sunlight and Whether it Receives Afternoon or Morning
400-450	10000	Should you not find a PTAC unit with a BTU Output to meet your heating and cooling needs, you will need to decide whether to use an undersized or oversized unit for the area.
450-550	12000	Slightly undersized PTACs operate continuously to provide more comfort and savings in a smaller room than oversized units operating intermittently. In larger rooms, two smaller units will cool more efficiently than one large unit, and in milder weather you can run a single unit to save money.
550-700	15000	Significantly undersized PTACs cannot cool the room down, nor remove moisture from the air. As a result, the room will feel warm and possibly humid.
700-1000	18000	Oversized PTACs will cool the space quickly, but not remove moisture to lower the humidity. As a result, the room will feel cool and humid.

 

PBC Series – Cooling Only Units

Model Number	Voltage	Cooling BTUH	AMPS	Wt. (lbs.)
PBC092G00CB	115	9,300	15	74
PBC122G00CC	115	11,800	15	80
PBC093G00CB	230 / 208	9,300 / 9,100	15	71
PBC123G00CC	230 / 208	12,000 / 11,800	15	78

 

PBE Series – Cooling with Electric Heat Units

Model Number	Voltage	Cooling BTUH	Electric Heat BTUH	kW	AMPS	Wt. (lbs.)
PBE093G35CB	230 / 208	9,300 / 9,100	11,000 / 9,000	3.5	20	73
PBC123G35CB	230 / 208	12,000 / 11,800	11,000 / 9,000	3.5	20	81

 

PBH Series – Heat Pump with Electric Heat Units

Model Number	Voltage	Cooling BTUH	Electric Heat BTUH	kW	Heat Pump (Reverse Cycle BTUH)	AMPS	Wt. (lbs.)
PBH092G12CC	115	9,000	3,900*	1.2	8,500	15	78
PBH073G35CC	230 / 208	7,400 / 7,200	11,000 / 9,000	3.5	6,800 / 6,600	20	76
PBH093G35CC	230 / 208	9,300 / 9,100	11,000 / 9,000	3.5	8,800 / 8,600	20	83
PBH113G35CC	230 / 208	11,700 / 11,500	11,000 / 9,000	3.5	11,400 / 11,200	20	86

*Secondary heat source recommended to be used in conjunction with unit during electric heat operation.

 

Accessories for PBC, PBE, and PBH Series Mini PTACs

Item No.	Description	Weight (lbs.)
PBWS01A*	Wall Sleeve – Steel insulated, includes stamped aluminum exterior grille	8
DK900D	Drain Kit – for internal drain applications	1

*Required for ALL New Installations. Please Note Warning below.
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov