Winchester 95% Single Stage Multi-Positional Gas Furnaces w/ ECM Blower Motor

Multi-positional compact cabinet height of 33 inches

Minimal conversion for downflow application (additional clearance needed for venting)

Control board with high level self-diagnostics and fault code displays to save time on servicing and troubleshooting

Electronic hot surface ignition increases safety and efficiency

DC ECM, constant torque, permanently lubricated blower motor has adjustable speeds to maximize comfort level

In-shot burners and sealed combustion for safe, quiet, and efficient operation

Vents horizontally or vertically as either single to two pipe application with schedule 40 PVC/ABS pipe

High tech tubular aluminized steel primary and stainless steel secondary heat exchangers

Not Certified for Mobile Home use

Certified for use in California

HOW TO SELECT A 95% EFFICIENT GAS FURNACE

You can refer to an estimate or proposal from a local contractor, refer to the size of your existing system that you may want replaced, or use the sizing estimation chart provided on this page. Use the map to determine your Region based on the location of your home. Using the equipment charts, find your Region and go down the column to locate the range that covers the Square Footage of your home. Follow the row to the right to determine the recommended Furnace for your application.

NOTE: These tables an charts are intended to be used as a guideline only. The information is based on conventional window space (<15%), insulation and building construction. Only use these tables as a reference. When including a finished basement, use 1/2 of the finished basement square footage with the rest of the area being calculated.

Hamilton Model Number	BTU Input/Output	Dimensions H x W x D (in.)	Available Tons	Supply Outlet W x D (in.)	Ship Wt (lbs.)	Energy Guide
TM9E040A10MP12	40,000 / 38,000	33 x 14.5 x 29.5	1.5 – 2.5	13.375 x 20	118
TM9E060B12MP12	60,000 / 57,000	33 x 17.5 x 29.5	2.0 – 3.0	16.375 x 20	128
TM9E080B12MP12	80,000 / 76,000	33 x 17.5 x 29.5	2.0 – 3.0	16.375 x 20	132
TM9E100C16MP12	100,000 / 95,000	33 x 21 x 29.5	2.5 – 4.0	19.875 x 20	149
TM9E120D20MP12	120,000 / 114,000	33 x 24.5 x 29.5	3.5 – 5.0*	23.375 x 20	164

*Please Note: 5 Ton/2000 CFM applications require two (2) side air returns.

Optional Furnace Accessories

*Please Note: Combustible Base is only required for downflow, heat only applications where the surface is combustible (ex. wood sub-floor).