ROYALTON® 95% 2-Stg Up/Horiz. Gas Furnaces w/ Var. Spd. Blower Motor

Natural gas ready and may be converted to LP gas with optional conversions kit 11K48

Upflow/horizontal design with compact cabinet height of 33 in. for flexible installation

Aluminized steel primary with crimped non-weld construction, and stainless steel secondary heat exchangers

Built-in, high level self-diagnostics with fault code displays standard on integrated control module for reliable operation

ECM variable speed blower motor for increased SEER efficiency, quiet operation, and enhanced dehumidification

two stage heating operation includes two stage gas valve, two stage inducer operation and variable speed ECM blower operation, adjustable delay timer allows two stage operation with a single stage thermostat; two stage thermostat recommended when installing a two stage condenser

Venting applications – may be installed as either 2-pipe sealed combustion, or single-pipe vent using indoor air for combustion air
Category IV Venting; may be vertically or horizontally vented using Schedule 40 PVC as either a one-pipe or two-pipe system for maximum flexibility in installation

Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty; see installation guide for more details

Professional installation recommended

10 year limited parts warranty / lifetime heat exchanger warranty with online registration

Not Certified for Mobile Home use

Complies with California’s South Coast Air Quality Management district Lowe NOx requirements

HOW TO SELECT AN 95% EFFICIENT GAS FURNACE

You can refer to an estimate or proposal from a local contractor, refer to the size of your existing system that you may want replaced, or use the sizing estimation chart provided on this page. Use the map to determine your Region based on the location of your home. Using the equipment charts, find your Region and go down the column to locate the range that covers the Square Footage of your home. Follow the row to the right to determine the recommended Furnace for your application.

NOTE: These tables an charts are intended to be used as a guideline only. The information is based on conventional window space (<15%), insulation and building construction. Only use these tables as a reference. When including a finished basement, use 1/2 of the finished basement square footage with the rest of the area being calculated.

Hamilton Model Number	1st Stage BTU Input/Output	2nd Stage BTU Input/Output	Dimensions H x W x D (in.)	Available Tons	Outlet Opening	Weight (lbs.)	Energy Guide
95G2UH045BV12	29,000 / 28,000	44,000 / 42,000	33 x 17.5 x 28.5	1.5 – 3.0	13 x 19.5	122
95G2UH070BV12	44,000 / 42,000	66,000 / 62,000	33 x 17.5 x 28.5	1.5 – 3.0	16 x 19.5	130
95G2UH090CV12	57,000 / 55,000	88,000 / 84,000	33 x 21 x 28.5	1.5 – 3.0	19.5 x 19.5	146
95G2UH090CV20	57,000 / 55,000	88,000 / 85,000	33 x 21 x 28.5	3.0 – 5.0*	19.5 x 19.5	158
95G2UH110CV20	72,000 / 70,000	110,000 / 105,000	33 x 21 x 28.5	3.0 – 5.0*	19.5 x 19.5	165
95G2UH135DV20	88,000 / 84,000	132,000 / 126,000	33 x 24.5 x 28.5	3.5 – 5.0*	23 x 19.5	180

*Please Note: 5 Ton/2000 CFM applications require two (2) side air returns.

Optional Furnace Accessories